0.12 to 1000 J Gel Coupled IPL Source Energy Sensor with Ø65 mm Aperture
0.12 to 1000 J Gel Coupled IPL Source Energy Sensor with Ø65 mm Aperture
The L50(300)A-IPL intense pulsed light sensor measures pulses from IPL dermatological sources. It has a 65 mm aperture with a glass window allowing measurement thru air or using gel. It can measure energy from 120 mJ to 1000 J. It has the high damage threshold LP2 absorber and covers the spectral range from 500 to 1300 nm.
- 500-1300 nm LP2 absorber with coated window
- Designed for gel and air coupled IPL sources
- 0.12 to 1000 J energy measurement range
- Ø65 mm aperture See All Features
Features
Choosing a Thermal Sensor
In this short “Basics” video we review the use – and selection - of thermal sensors for measuring low, medium and high laser powers.
Sensors for Measuring Laser Power
In this short "Basics" video we review in general how one goes about measuring laser beam power, so that you'll have a clear understanding of what the different sensor types are, and when to use each type.
Thermal Power Sensor Accuracy
Ophir former CTO Dr. Ephraim Greenfield discusses the various factors that contribute to uncertainties in measurement when using Ophir laser power and energy meters.
Effects of Incidence Angle on Measurements
In this video, you will learn to what degree a beam’s incidence angle matters, and for which sensor types this should be taken into account.
Accessories
Thermal Sensor Cables
Sensor Connector to BNC Adapter
Resources
Data Sheets
Medium Power Large Aperture Thermal Sensors - Sensors for Intense Pulsed Light IPL Datasheet(291.8 kB, PDF)
Technical Notes
Absorption, Angle Dependence and Damage Graphs for Thermal Sensors(216.1 kB, PDF) L50(300)A-IPL User Notes(368.6 kB, PDF) Calibration of L50(300)A-IPL Sensor for use with Gel Coupled IPL Sources 5 Situations Where Laser Performance Measurement is Necessary Effect of Ambient Conditions on Laser Measurements How do I know what range, or scale, to set my power/energy meter to? Setting Your Thermal Sensor up in Energy Mode for the Best Accuracy and Repeatability How Much of the Power Sensor Aperture Can My Laser Fill Up? How to Properly Select a Laser Power or Energy Sensor Common Reasons for Thermal Sensor Damage or Out of Tolerance Conditions
Drawings & CAD
L50(300)A-IPL Drawing(132.4 kB, PDF)
Catalogs
Power Sensors Catalog(11.2 MB, PDF) Laser Power & Energy Measurement and Laser Beam Analysis Catalog(27.5 MB, PDF)
